PRODUCT SPECIFICATION
Rechargeable Lithium Ion Battery
Model : NTNY 66Ah/12V
Nangtong Ningyuan Automation Technology Co. Ltd.
NO299.Gangzha Road,Nantong,Jiangsu,China
Tel: 0513-83598587
Http://www.cnntny.com
1.Cell specification (fresh cell tested at 25±2.5OC, using standard charge and discharge unless otherwise specified)
No. | Item | Parameter | Note |
1 | Battery Model | NTNY-43184 |
|
2 | Nominal Voltage（V） | 3.2 |
|
3 | Nominal Capacity（Ah） | 22Ah |
|
4 | Nominal Energy（Wh） | 70.4Wh |
|
5 | Operating Voltage Range（V） | 2~3.65 | 100%DOD |
6 | Internal Resistance | ≤1.0mΩ |
|
7 | Standard Charge Current | 0.5C |
|
8 | Standard Discharge current | 1C |
|
9 | Max. Discharge current | 3C |
|
10 | Operating Temperature Range | -20℃～+65℃ |
|
11 | Operating Humidity | <90% |
|
12 | Dimension（mm） | H(Max.)：43 mm D(Max.)：184 mm |
|
13 | Weight（g） | ≤550g |
|
14 | Cycle life | 2000times | 80%DOD |
2.Battery pack (fresh cell tested at 25±2.5OC, using standard charge and discharge unless otherwise specified)
No. | Item | Parameter | Note |
1 | Nominal Voltage（V） | 12.8V |
|
2 | Nominal Capacity（Ah） | 66AH |
|
3 | Nominal Energy（Wh） | 845Wh |
|
4 | Operating Voltage Range（V） | 8~14.6V | 100%DOD |
5 | Standard discharge | 20A |
|
6 | Operating Temperature Range | -20℃～+65℃ |
|
7 | Operating Humidity | <90% |
|
3. Technical characteristics
3.1 Electronic performance (fresh cell tested at 25±2.5OC, standard charge and discharge unless otherwise specified)
NO. | ITEM | CRITERION | |
3.1.1 | Discharge rate capability | discharge capacity at 5C discharge capacity at 0.5C | ≥95% |
discharge capacity at 10C discharge capacity at 0.5C | ≥90% | ||
discharge capacity at 15C discharge capacity at 0.5C | ≥85% | ||
3.1.2 | Cycle life | discharge capacity of 2000th cycle original discharge capacity | ≥80% |
3.1.3 | High-Low temperature discharge performance (0.5C discharge) | discharge capacity at -10 OC discharge capacity at 25OC | ≥60% |
discharge capacity at 0 OC discharge capacity at 25OC | ≥75% | ||
discharge capacity at 60 OC discharge capacity at 25OC | ≥100% | ||
3.1.4 | Storage performance | residual capacity after 28d storage original diacharge capacity | ≥97% |
recover capacity after 28d storage original diacharge capacity | ≥99% | ||
3.2 Environmental and safety characteristics
ITEM | TEST METHOD | CRITERION |
3.2.1 Over discharge | Under the battery discharge to the cut-off voltage, then discharge with 0.1C, until the voltage of battery is zero. | No explosion, no fire, no leakage |
3.2.2 Over charge | After the battery fully charge, overcharge with 0.5C for one hour. | No explosion, no fire, no leakage |
3.2.3 reverse charge | After the battery fully charge, with 1/6C reverse current constant current charging for 8h. | No explosion, no fire, no leakage |
3.2.4 130℃ high temperature | After the battery is fully charged, the battery is placed in the oven for 3OC ~ 7OC / min heating rate, the temperature rose to 130 OC after the start time, and (130 ± 2) OC temperature range of security within 1h. | No explosion, no fire, no leakage |
3.2.5 High and low temperature impact | When the battery is fully charged, shelved at -40 OC for 1h, then shelved 1h at 85 OC, do such cycle for 32 times, then remove under room temperature for 6h. | No explosion, no fire, no leakage |
3.2.6 Vibration | When the battery is fully charged，put the battery on the vibration table of amplitude 2mm, frequency 10Hz-30Hz for one hour. | No explosion, no fire, no leakage, no deformation. |
3.2.7 Free fall drop | After the battery fully charge, let the battery fall from a height of 1.0m to the hard wood with thickness of 20mm, each surface for once. | No explosion, no fire, no leakage |
3.2.8 Soaking | After the battery fully charged, the battery was sinked at room temperature, depth will be subject to immersion cell surface within 24 h, then take out under room temperature for 6 h. | No explosion, no fire, no leakage |
3.2.9 Extrusion | After the battery is fully charged, the battery surface with special equipment was squeezed until the batteries dimensions changed to 1 ~ 3mm. | No explosion, no fire |
3.2.10 Short circuit | When the battery is fully charged, with the internal resistance of not more than 50mΩ wires connecting to the battery positive and negative extremes for 1h. | No explosion, no fire, no leakage |
3.2.11 Constant temperature/humidity/heat | After the battery fully charged the in the relative humidity of 90% ~ 95% of the constant temperature and humidity box, duration of 48 h, then take out under room temperature for 6 h. | No explosion, no fire, no leakage |
3.2.12 Nail | A nail (diameter : 2.5~5mm) is penetrated vertically through the center of the fully charged cells. | No explosion, no fire, no leakage |
4. Warning in handling the lithium-ion cell
To prevent the possibility of the cell from leaking, heating, explosion, please observe the following
precautions:
Don’t immerse the cell in water;
Don’t use and leave the cell near a heat source such as fire or heater;
When charging, use a cell charger specifically for that purpose;
Don’t reverse the positive and negative terminals;
Don’t discard the cell in fire or heater;
Don’t connect the cell to an electrical outlet directly;
Don’t discard the cell in fire or heater;
Don’t connect the positive and negative terminal directly with metal objects;
Don’t transport and store the cell together with metal objects such as necklaces, hairpins;
Don’t directly solder the cell;
Don’t pierce the cell with a nail or other sharp object.
5.Shipping
The capacity of delivery battery is approximately at 50% of charging. During transportation , keep the battery from acutely vibration, impacting, solarization, drenching.
Long press the screen to identify the QR code
Open the phone to scan QR code
